Cabletron Systems ETWMIM User Manual download pdf (Page 28)

9030941 E5 Conﬁguration Views

3-3

ETWMIM Device Conﬁguration View

Interface Conﬁguration Table

This button, if selected, will reset the NVRAM to default values the next time

the ETWMIM is rebooted.

Interface Conﬁguration Table

The Interface Conﬁguration Table provides the following port conﬁguration

information for each of the ETWMIM’s ports.

Index

This ﬁeld displays the interface port number.

Description

This ﬁeld displays a textual description of the interface including the name of

the manufacturer and the product name.

Type

This ﬁeld displays the type of hardware interface for the port. Possible

interface types and a brief description of each type are shown in Table 3-1.

Bandwidth

This ﬁeld displays the estimated bandwidth of the interface measured in bits

per second. For interfaces that do not vary in bandwidth or for which no

accurate estimate can be made, a nominal bandwidth is provided.

Physical Address

This ﬁeld displays the Ethernet (MAC) address of the port.

Operation Status

This ﬁeld displays the current operational state of the port (UP, DOWN, or

TESTING).

Admin Status

This ﬁeld displays the desired operational state of the port (UP, DOWN, or

TESTING).

Last Change

This ﬁeld displays the System Up Time value when the port entered its

current operational state.

NVRAM

Table 3-1. ETWMIM Interface Types

Interface Type Description

ethernet-csmacd Ethernet CSMA/CD

iso88025-tokenRing ISO Token Ring

ds1 T1 Link (USA and Japan)

ppp Point to Point Protocol

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 46 47

No comments

Cabletron Systems ETWMIM User Manual Page 28