Cabletron Systems 38 User's Guide download pdf (Page 16)

CHAPTER 2:

INSTALLATION

Page 2-2 EMC38-12 USER’S GUIDE

2.2.1 Rack Mounting the EMC38-12

Before installing the EMC38-12, care must be taken to ensure that the

rack used will support the unit and that the rack remains stable with the

EMC38-12 installed. In order to allow for proper cooling within the rack,

there must be a two inch clearance on either side of the unit. Refer to

Chapter 1

for power and enviromental requirements.

The following procedure explain how to install the EMC38-12 in a

19-Inch rack.

1. Remove four cover screws (two from each side) located along the

front edges of each side of the EMC38-12. Figure 2-1 shows the

location of the screws.

2. Using the four cover screws removed in step 1, attach the rack

mounting brackets to each end of the EMC38-12.

Figure 2-1. Installing the Rack Mount Brackets

Do not remove the cover from the EMC38-12.

Screws (4)

Rack Mounting

Brackets (2)

EMC38-12

Ethernet Media Converter

WITH

LANVIEW

TPLINK

XMT

RCV

FOLNK

12 11 10 9 8 7 6 5 4 3 2 1

PWR

12 10 9

6543

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 34 35

No comments

Cabletron Systems 38 User's Guide Page 16