Cabletron-systems 2000 User Manual download pdf (Page 53)

Managing the Hub 2-31

The SmartSwitch 2000 Chassis View

duplex mode and negotiation parameters; for Fast Ethernet and Gigabit Ethernet

ports on second generation devices you can set speed, duplex mode, and ßow

control parameters; and for COM ports, you can select the operation you wish the

port to perform, and set any associated speed parameters. FDDI, Ethernet, Fast

Ethernet, and Gigabit Ethernet Port ConÞguration windows are available from

the Chassis View Port menus (except on Ethernet MicroLAN Switches where they

are available from the Bridge Port menu); the COM Port option is available from

the Device menu.

Conﬁguring Standard Ethernet and FDDI Ports

The Port ConÞguration window available for both standard Ethernet and FDDI

ports allows you to set an interface to either Standard or Full Duplex Mode. Full

Duplex mode effectively doubles the available wire speed by allowing the

interface to both receive and transmit simultaneously. This window will also

display the mode currently in effect on the selected interface.

To access the Port ConÞguration Window:

1. From the Chassis View, click to select the port you wish to conﬁgure; the Port

Menu will display.

2. Click on Conﬁguration. The Port Conﬁguration window, Figure 2-14, will

appear.

To access the Port ConÞguration window on SmartSwitch 2000 Ethernet

MicroLAN Switches:

1. From the Chassis View, click on Device in the menu bar to access the Device

menu.

2. Click on Bridge Status. In the resulting window click on the Bridge Port

button (e.g., ) to access the Bridge Port menu.

3. Click on Conﬁguration. The Port Conﬁguration window, Figure 2-14, will

appear.

Figure 2-14. The Port ConÞguration Window

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 195 196

No comments

Cabletron-systems 2000 User Manual Page 53