Cabletron-systems SmartSTACK ELH100 User Manual Page 53

  • Download
  • Add to my manuals
  • Print
  • Page
    / 122
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 52
9033060 ELH100-12/24TX User Interface 35
SNMP Configuration Menu
Use the SNMP Configuration Menu to display and modify parameters for
the Simple Network Management Protocol (SNMP). The Agent Module
monitors the hardware status of the hub (or connected stack), as well as
the traffic passing through the ports. A Network Management Station
(NMS) can access this information using third-partynetwork management
software. Access rights to the management agent are controlled by
community strings. To communicate with the management agent, the
NMS must first submit a valid community string for authentication. The
options for configuring community strings and related trap functions are
described in Figure 3-6, Figure 3-7, and Figure 3-8 and their
accompanying tables
.
Figure 3-6. SNMP Configuration Menu
SNMP Configuration
==================
Transmit Authentication Failure Traps: YES
SNMP Communities ...
SNMP Trap Destinations ...
<APPLY> <OK> <CANCEL>
Press <ENTER> to go to the SNMP Communities Screen
Use <TAB> or cursor keys to move, <SPACE> to toggle, <ENTER> to select
Selection Description
Transmit
AuthenticationFailure
Traps
Issue a trap message whenever authentication of an
SNMP request fails. The default is to issue traps to
specified IP trap managers.
SNMP Communities Assigns SNMP access based on specified community
strings.
SNMP Trap
Destinations
Specifies management stations that will receive
authentication failure messages or other trap
messages from the hub.
Page view 52
1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 121 122

Comments to this Manuals

No comments