Cabletron-systems SmartSTACK ELH100 User Manual download pdf (Page 64)

46 ELH100-12/24TX User Interface ELH100-12/24TX

User Password Menu

The User Password menu is used to display or modify user names and

passwords for the on-board configuration program. There are two user

types, Administrator and Guest. Only the Administrator has write access

for parameters governing the SNMP agent. You should therefore assign

a user name and password to the Administrator as soon as possible, and

storeitinasafeplace.

Passwords can consist of up to 14 alphanumeric characters and are not

case sensitive. The configuration program will allow a user three attempts

at entering a password before locking the user out by terminating the

current connection. If for some reason your password is lost, or you can

not gain access to the system configuration program, contact your

Cabletron distributor for assistance.

Figure 3-16. User Password Menu

Display/Change User Names and Passwords

=======================================

User Type User Name Password Password Verify

------- -------- -------- -----------

Administrator: admin ************** **************

Guest: guest ************** **************

Enter a user name, 1 to 14 characters

Use <TAB> or cursor keys to move, <ENTER> to select,

<Ctrl-F> to move forward a character, <Ctrl-B> to move back a character

Selection Default Description

Administrator name: admin

password: admin

Administrator has access privilege of Read/Write

for all screens.

Guest name: guest

password: guest

Guest has access privilege of Read Only for all

screens.

1 2 ... 59 60 61 62 63 64 65 66 67 68 69 ... 121 122

No comments

Cabletron-systems SmartSTACK ELH100 User Manual Page 64