Cabletron-systems SmartSTACK ELH100 User Manual download pdf (Page 84)

66 Web-Based Management ELH100-12/24TX

Agent Configuration

Select “Agent” then “Agent Configuration” to display IP configuration and

other information.

Item Description

IP Address IP address of the Agent Module you are managing. Valid IP

addresses consist of four numbers, of 0 to 255, and separated

by periods. (The default address is 0.0.0.0.)

Subnet Mask Subnet mask of the Agent Module you are managing. This

mask identifies the host address bits used for routing to specific

subnets. (The default subnet mask is 0.0.0.0.)

Gateway IP Gateway used to pass trap messages from the management

agent to the network management station. Note that the

gateway must be defined if the management station is located

in a different IP segment. (The default gateway is 0.0.0.0.)

SLIP IP IP address of the Agent Module used when accessing the

configuration program via an out- of-band SLIP connection to

the serial port.

SLIP Subnet Mask Subnet mask for the SLIP IP address of the Agent Module.

SLIP Gateway SLIP gateway IP address used to pass traffic to the network

management station. Note that the gateway must be defined if

the management station is located in a different IP segment.

Agent Attached to The network segment (10 Mbps or 100 Mbps) to which the

Agent Module is attached.

1 2 ... 79 80 81 82 83 84 85 86 87 88 89 ... 121 122

No comments

Cabletron-systems SmartSTACK ELH100 User Manual Page 84