Cabletron Systems STHI 44 STHI-44 Specifications Page 64

  • Download
  • Add to my manuals
  • Print
  • Page
    / 104
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 63
SPECTRUM Enterprise Manager Cisco StrataCom BPX8600 Series
64 of 105
transmit queue. This value is specified in bytes.
When the Frame Relay Endpoint VcQSize value
exceeds this value, then the FECN (Forward
Explicit Congestion Notification) bit will be set in
all frames transmitted to the remote endpoint.
QIR
The transmit Quiescent Information Rate (QIR)
parameter (in 100s of bits per second) for this
endpoint. This value can range between the MIR
and PIR values and must be between 2400 and
204800. This parameter has meaning only if the
Frame Relay Endpoint Enable FST parameter is
set to “true.”
% Utilization
The value of this object is equal to the channel
percentage utilization setting for this endpoint.
This is the expected long-term utilization of the
channel by this endpoint.
ForeSight
The value of this object determines whether or not
the ForeSight option is being used. If set to false,
the ForeSight is not used, and if true then
ForeSight will be used.
Priority
The value of this object determines the priority
that is given to the data. If set to low, then the
data is given the standard priority, and if set to
high, the data will be given a higher priority.
Higher priority data is placed at the beginning of
the port’s queues.
Group Flag
Specifies whether this is a grouped connection.
The MIB object Group Flag provides grouping
information about all the connections using that
Connection Table entry whereas this object
provides the same information for this endpoint.
Local Loopback
Specifies the Local Loopback state you can set for
the endpoint.
Loc Rmt Lpbk
Specifies the Local-Remote Loopback state you
can set for the endpoint.
Note:
Note:
This object CAN NOT be set for ATFR
or ATFST connection during
connection modification.
Page view 63
1 2 ... 59 60 61 62 63 64 65 66 67 68 69 ... 103 104

Comments to this Manuals

No comments