Cabletron Systems STHI 44 STHI-44 Specifications Page 71

  • Download
  • Add to my manuals
  • Print
  • Page
    / 104
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 70
SPECTRUM Enterprise Manager Cisco StrataCom BPX8600 Series
71 of 105
corresponds to the CDVT (0+1) parameter defined
by the ATM standard documents.
CLP High
The value of this object is equal to the CLP (Cell
Loss Priority) tagging activation threshold for this
endpoint.
CLP Low
The value of this object is equal to the CLP (Cell
Loss Priority) tagging deactivation threshold for
this endpoint.
CLP Tagging
The value of this object enables the CLP (Cell Loss
Priority) tagging for handling non-compliant cells.
When enabled the CLP bit is set on non-compliant
cells. When disabled non-compliant cells are
discarded.
ForeSight
The value of this object determines whether or not
the ForeSight option is being used. If set to false,
then ForeSight is not used, and if true then
ForeSight will be used.
ForeS Rate Up
The value of this object is equal to the ForeSight
Rate Up value in cells per second per adjust for
this endpoint.
ForeS Rate Down
The value of this object is equal to the ForeSight
Rate Down value expressed as percentage of MCR
(Minimum Cell Rate).
QIR To
The value of this object is equal to the QIR
timeout value. This object corresponds to the
Initial Cell Rate (ICR) timeout.
FS Min Adjust
The value of this object is equal to the ForeSight
minimum adjustment period.
Description
This field contains a textual description of this
Frame Relay Bandwidth Class.
BCM
The value of this object enables the generation of
RM (Resource Management) cells when
congestion is detected in the connection.
FGCRA
The value of this object enables FGCRA (Frame-
based Generic Rate Control Algorithm). FGCRA is
applicable with AAL-5 (ATM Adaptation Layer)
traffic only.
Connection Type
The value of this object defines the connection
type associated with this class.
Page view 70
1 2 ... 66 67 68 69 70 71 72 73 74 75 76 ... 103 104

Comments to this Manuals

No comments