Cabletron Systems CyberSWITCH CSX500 Specifications download pdf (Page 162)

Configuration with QuickSET

146 QuickSET Configuration Guide

Figure 160 Modify Compression and Congestion Window

The deﬁnitions of the ﬁelds in the Compression and Congestion window are listed below:

Interface # - Alias — Displays the available, pre-conﬁgured interface numbers and the alias

names assigned to them.

Compression — Displays the status of data compression for a speciﬁc interface. Options for this

ﬁeld are either on (box shows a check mark) or off.

The following deﬁnes the ﬁelds for Frame Relay only:

Committed # Burst — Displays the Committed Burst size, which is the maximum amount of

data a user may offer to the network during a calculated time interval. Data is guaranteed not to be

discarded by the network.

Excess # Burst — Displays the Excess Burst size, which is the maximum amount of data by

which a user can exceed the Committed Burst size. This data is not guaranteed to be passed by the

network.

Throughput — Displays the maximum bandwidth of your WAN connection.

To turn data compression on or off for a speciﬁc interface, click on the interface number that you

wish to conﬁgure in the compression scroll list, then click the compression check box. Click OK

to apply the changes to the interface.

When you have completed compression conﬁguration, click on the Save button to save any

changes you make, then click on the Ex

it button to exit the Compression and Congestion window.

1 2 ... 157 158 159 160 161 162 163 164

No comments

Cabletron Systems CyberSWITCH CSX500 Specifications Page 162