Cabletron Systems CyberSWITCH CSX500 Specifications download pdf (Page 36)

Configuration with QuickSET

20 QuickSET Configuration Guide

Wide Area Time Slot Conﬁguration Windows

The following section contains the following Wide Area Time Slot Conﬁguration windows:

Wide Area Frame Relay Time Slot Configuration Window

Wide Area PPP Time Slot Configuration Window

Wide Area HDSL Time Slot Configuration Window

Wide Area Frame Relay Time Slot Conﬁguration Window

The Wide Area Frame Relay Time Slot conﬁguration window shown in Figure 17 displays when

you click on the N

ext>> button in the Wide Area T1, E1, or DI conﬁguration windows when

Frame Relay is chosen as the WAN Protocol.

Figure 17 Wide Area Frame Relay Time Slot Conﬁguration Window

Frame Relay Time Slots — A full line consists of 24 Time Slots (T1 and DI) or 31 Time Slots

(E1), each capable of up to 64 Kbps throughput. If you are leasing an entire line from your service

provider, you may select all the Time Slots by clicking the Select A

ll button. A “check mark”

displays in the selected box. If you have leased a portion of a fractional T1 or E1 line, your service

provider will tell you which Time Slots are allocated for your use.

If you are conﬁguring a WPIM-DI Time Slot table, any available Time Slots that are not checked

are mapped to the DI Interface. If you lease an entire T1 line, any Time Slots that are not selected

in the Frame Relay conﬁguration window are used by the device connected to the DI interface.

When you have completed Wide Area Frame Relay Time Slot conﬁguration, click on the N

ext>>

button, and go to the General Configuration section.

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 163 164

No comments

Cabletron Systems CyberSWITCH CSX500 Specifications Page 36