Cabletron Systems CyberSWITCH CSX500 Specifications download pdf (Page 139)

Routing Configuration Window

QuickSET Configuration Guide 123

Below are descriptions of the ﬁelds in the advanced IP Routing settings window:

Interface Number — Displays the active Interface Number.

Alias — This an alias name that you create for the interface number for convenience.

Local WAN IP Address — This is the IP Address of the WAN link (identiﬁed by Interface

Number) leading into the Telco cloud. A subnet mask is required before you can utilize the link.

Subnet Mask — Displays the subnet mask for the Local WAN IP Address.

Modify — Use this button to change an entry in the Advanced Routing Options window.

Split Horizons Window

The Split Horizons window shown in Figure 134 below, displays after clicking the Split Horizons

button in the Bridging and Routing window. The Split Horizons window shows a list of interface

numbers with their respective aliases, and the state (ON/Off) of IP, IPX. and IPX SAP protocols.

Figure 134 Split Horizons and Modify Windows

Split Horizons — Split Horizons may be enabled, or disabled, for IP, IPX, and/or IPX SAP

protocols for a selected Interface Number. When Split Horizons is ON (enabled) for any of the

protocols (IP RIP, IPX RIP, and/or IPX SAP), protocol information for a given Interface Number,

received on a port will NOT be rebroadcast on that port.

1 2 ... 134 135 136 137 138 139 140 141 142 143 144 ... 163 164

No comments

Cabletron Systems CyberSWITCH CSX500 Specifications Page 139