Cabletron Systems CyberSWITCH CSX500 Specifications download pdf (Page 153)

Routing Configuration Window

QuickSET Configuration Guide 137

Figure 149 Add IP Host and Modify IP Host Windows

The IP Host Map is a database of remote IP hosts, deﬁned (generally) by their IP Address, and

(more speciﬁcally) by their Interface Number and Data Link Connection Identiﬁer (DLCI). The

DLCI and Interface Number deﬁne the switched connection to the Telco central ofﬁce.

Use the Interface Number scroll button to select an Interface Number. Enter the DLCI (Data Link

Connection Identiﬁer) number in the DLCI window. The DLCI number is the identiﬁer for the

virtual circuit present on the interface. On an interface conﬁgured for Frame Relay, this number is

the DLCI for the IP Address at the end of the circuit. Enter the IP Address of the host in the IP

Address window. The Add IP Host window (Figure 149, above), appears when you click on the

dd button to add an IP Host Map to the table.

Modify IP Host Window

The Modify IP Host window (shown in Figure 149, above) appears when you click on the Modify

button in the IP Host Map window. The host data displayed will correspond to the Interface

Number displayed in the IP Host Map window. When you have ﬁnished modifying the data, click

the OK button to enter the new data into the database. The database will be saved when you click

the Save button and then exit QuickSET.

1 2 ... 148 149 150 151 152 153 154 155 156 157 158 ... 163 164

No comments

Cabletron Systems CyberSWITCH CSX500 Specifications Page 153