Cabletron Systems CyberSWITCH CSX500 Specifications download pdf (Page 20)

Configuration with QuickSET

4 QuickSET Configuration Guide

Figure 4 Ethernet 1 and 2 Conﬁguration Window

Local Ethernet (1 and 2) IP Address —

Displays the IP Address for the Local Ethernet

interface selected (Ethernet 1 or Ethernet 2). Place the cursor in this ﬁeld and type the preferred IP

Address in Dotted Decimal Notation (DDN) format. The

Local Ethernet 1

IP Address must be

entered in order to continue conﬁguration.

Local Ethernet (1 and 2) Subnet Mask —

The Subnet Mask takes the same form as an IP

address; four groups of three decimal digits, separated by periods. Each group must be in the

numerical range of 0 to 255. When you click on the Subnet Mask ﬁeld (the ﬁrst time you use

QuickSET), a default Subnet Mask displays, based on the IP address you entered.

If you wish to use a different Subnet Mask, enter it at this time in DDN format. The

Local

Ethernet 1

Subnet Mask must be entered in this ﬁeld to continue.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 163 164

No comments

Cabletron Systems CyberSWITCH CSX500 Specifications Page 20