Cabletron Systems CyberSWITCH CSX500 Specifications download pdf (Page 42)

Configuration with QuickSET

26 QuickSET Configuration Guide

General Conﬁguration

The General Conﬁguration Window shown below in Figure 25, lets you select DHCP, and/or

Priority IP Queueing functions for conﬁguration.

Figure 25 General Conﬁguration Window

DHCP Settings Conﬁguration Window

The DHCP Settings conﬁguration window (shown in on the following page) displays after clicking

on the DHCP Server... button in the General Conﬁguration window. The DHCP Settings

conﬁguration window is used to conﬁgure the DHCP settings for the CyberSWITCH or HSIM. If

you are conﬁguring a CSX400 you will see the HSIM DHCP Settings window shown in

Figure 26. If you are conﬁguring an HSIM or CSX200 you will see the DHCP Settings window

shown in Figure 27.

The following deﬁnitions explain the ﬁelds in the DHCP Settings conﬁguration window:

DHCP Server is Enabled — Clicking this box lets the CyberSWITCH or HSIM act as a DHCP

server.

DHCP IP Address Pool — A set of contiguous IP addresses that can be assigned by this device

to other devices requesting an IP address.

Default Gateway — Any packets that are not assigned to your subnet will be sent to this location.

Subnet Mask — Only a Class C subnet mask can be used (the device supports only 255

addresses).

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 163 164

No comments

Cabletron Systems CyberSWITCH CSX500 Specifications Page 42