Cabletron Systems CyberSWITCH CSX500 Specifications download pdf (Page 92)

Configuration with QuickSET

76 QuickSET Configuration Guide

Wide Area DI - Conﬁguration Window

The Wide Area (DI) conﬁguration window is shown in Figure 82, below.

Figure 82 Wide Area DI Conﬁguration Window

The line conﬁguration information given below and on the following pages must be supplied by

your service provider. Factory default settings are in bold. The WPIM-DI has two connectors

allowing two devices to share the available Time Slots in a T1 WAN link; an NI (Network

Interface) Port, and a DI (Drop and Insert) Port.

DI Functionality

Enable — The NI Port is connected to the T1 WAN connection. Any timeslot set to zero will

pass (that timeslot) from the NI Port to the DI Port (see Figure 83 on the following page). The

clock must either be local or come into the WPIM-DI through the NI Port.

Data From DI — The DI Port is connected to the T1 WAN connection. Any timeslot set to zero

will pass (that timeslot) from the DI Port to the NI Port. The clock must come into the WPIM-DI

through the NI Port.

Disable — The Drop and Insert functionality is turned off. The NI Port is connected to the T1

WAN interface and no timeslots are passed to the DI Port regardless of whether they are set to zero

or not.

1 2 ... 87 88 89 90 91 92 93 94 95 96 97 ... 163 164

No comments

Cabletron Systems CyberSWITCH CSX500 Specifications Page 92